Thursday, August 16, 2012

Starting with Bees

I picked up my first bees yesterday. I ordered two 5 frame nucs which is short for hive nucleus. It contains a starter hive with a queen, workers, brood, eggs, and whatever they have been building for a short while. I picked up one for me and my father (papa bear). He got me into this whole beekeeping thing, and after he got me interested, I have returned the favor by dragging him along.

I had to drive north to Davie, Florida which is sort of an ag area. My truck is a single cab ranger, which made it difficult to fit the two nucs inside next to me... yes inside with me while driving! Ahhh. The reason being is for the air-conditioning. They can easily over heat. What a scary thought to think them all flying outside of the box while going 70 MPH on I-75.

It took me about an hour to get home. One bee managed to free itself from the box while I was driving and attempted to exit through the passenger window. I thought, "this is the craziest thing I've ever done. I can't believe I am doing this." When I arrived home, I exited my side and then slowly opened to passenger door. The escapee flew up, spiraled, and then took off.

I managed to get home about the time my wife pulled up in which I notified her that the bees were in the truck. I placed my hive body, stand, covers and all in the appropriate place that I have been preparing for weeks and grabbed my bee suit. My wife reviewed the steps to CPR and how to call for emergency help as I suited up and put my boots on. It wasn't exactly what I needed to hear before I took a box of thousands of bees and forced them into a new home.

God bee suits are hot. I cut through and peeled back the tape that seeled the box and opened the lid. Oh man, they flew everywhere. There I stood, in a flurry of bees, when before I would have ran at the sound of a faint buzz. I began to slowly move frame by frame transferring from nuc to hive box. I was sweating like a pig, with a big canvas material jacket on and a screened veil distorting my vision. I still couldn't believe what I was doing.

After placing the cover back on to the hive, I moved over to my dad's nuc to open the entrance at least (our plan is to meet up to, since he lives about 4 hours away on the gulf coast). As I squatted down, I felt a sharp pinch in the back of my calf. "Ouch!" I thought. "Ooooweee," I murmured. They got me! It was my first sting since I was a little kid and after about 30 seconds to a minute the heat, stinging, and sharp pain had subsided. It's funny that it took until the last thing I did, peeling back tape from an entrance and carelessly squatting to get stuck with a stinger. I scurried back into the house to take off my hot bee suit and peered outside out my job well done.

"Oh damn," I thought, I hadn't properly put the cover on the hive box and bees were curiously moving out of the hive.

I'll get that later this morning before work. I had enough excitement for one night. Check out my pics of the event!
Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

Friday, August 3, 2012

Reaching out to open space

What does a guy have to do to get some bees around here? I've called, emailed, and beckoned towards a countless number of people. Every available starter hive or 5 frame nuc is 2-3 hours away. What is shocking to me is the lack of support from local beekeepers. No one is extending a palm to meet my outreached hand. This baffles me, just as I would readily help anyone who needed assistance or showed energy to get started in sustainable practices. Which caused me to ponder whether this is just my nature or is receiving even consultant assistance is a service that should be payed for? This becomes the essential question: Is what we are doing a service or a hobby/activity? I know that currently it is a hobby for me and perhaps it will turn into a business later down the road. I suppose if hobby beekeepers have this desire than they see no harm in charging a fee for helping or making a simple split of their hives. I am at a disadvantage during this time of year, when I can't order bees in the mail and have to start with an established colony. But I still don't think it should be this hard. It gives me time to get everything ready I suppose. And the location in my yard is looking awesome. I will post some pictures shortly. I am working on the stand where the hive and future hives will sit. On a side note. I have heard that Costco is selling out a certain model of solar panels for remarkably cheap. I have heard that there is a 220W panel for 179.99 but have only been able to find a 100W for 189.99 online. Maybe if you contact them you will be able to locate. Here's the link Costco Solar Panel

Tuesday, July 31, 2012

So Busy, do I have enough time???

I finally tore done the old coop. Like I stated before, it was huge. It would have made a better doll house than a coop. It wasn't meant to move or be placed on uneven ground. The backyard did not supply level sitting. As I've worked in the yard, the apparent slope has become more and more noticeable. This is strange to imagine in a flat Florida backyard. The poor structure was always titling. It finally came to a crash when moving it last. This prompted me to change the coop in the first place. The backyard was a complete mess for weeks. I am not a clean freak, but I do not like things being a mess. I cleaned it all up on Sunday and the additional 4 ft run for the chickens is ready to be placed. I put a coat of polyurethane on the beehive(am currently not a fan of the painted look, yesterday. I put the rest of the plastic sheets on the garden beds and secured it down. This is to solarize it for the month of August. There are so many Root Knot Nematodes in the soil. There was also a fair amount of Fusarium fungi that killed off all the tomatoes. I had to sacrifice quite a few plants, but they were covered in whiteflies anyway. For the Florida folks out there, we understand that little to nothing can withstand the heat, humidity and problems that come with the intense summers. Some may argue that it gets more hot elsewhere, and they may be correct, but add heat with moisture and you have quite the environment for the growth of unwanted fungi and bacteria. Bugs also thrive when plants are ailing. So after yesterdays work, I started to realize that the backyard is almost complete. When I put in the beehive area, which I'd like to have enough room for 3-4 eventually, the entire yard will either be planted or used for traffic. I have the rabbits and chickens, and would like to add quail again. I had a lot of quail previously but I couldn't secure the cages well enough and they were picked off by raccoons and opossums. I have such a small backyard, but have planted so many trees. I am really pleased with how things are turning out. The title to this post refers to having enough time to solarize, finish the beehive area, chicken run, and hanging rabbit cages before I have to go back to work. As a teacher, I get the summers to refuel and to reinvest time in sustainability.

Saturday, July 28, 2012

Work in Progress...

I read in a beekeeping book for new beekeepers that it is best to purchase a fully assembled hive. Siting that the construction of a hive is intricate, the author stated that it may take weeks to finish the frames, boards, and boxes for the novice. It really did take me until Thursday to take out the pieces an begin putting all the pieces together. Taking the information read in the book to heart, I figured I would work on the frames and work my way to the boxes over the next couple weeks. Armed with wood glue, nails, hammer, and a square(few others) I started on the first frame. Because I did most of my direction research via YouTube, I felt confident in what I was about to embark upon. I started with one frame just to test the waters, then employed an idea I saw a beekeeper utilize: gluing and assembling frames in rapid succession. By lining up the top bars parallel to one another, the side bars can be glued and the tightened in place. Quickly, the bottom bars can be glued in place. I begin doing 5 and more at a time until 20 had been glued and assembled. Then came the nailing. Each corner took two nails totaling 8 nailed per frame. I had purchased a precision hammer for the endeavor and it worked well. I was hesitant at first to order unassembled frames, since most seem to use a compressor and staple gun. I knew I was at a distinct disadvantage. Regardless, it took me about an hour or so to finish 20 deep size frames. By my calculations, the rest of the assembly project would only take several more hours. I had little experience growing up with tools and I may have hammered my first nail when I was 25. Neither was the mentorship there nor the opportunity. Unfortunately this has led to an extremely embarrassing hammer ability. It is a precise skill to be able to nail with precision, which I am slow to attain. There were plenty of bent nails in the building of the frames. I thought I was getting it down at times, but still made quite a few mistakes. Later that night, I took out the 20 medium sized frames and started again. I finished those within less than an hour. So I picked up the boxes and grabbed my 24" bar clamps. I had ordered 8 off eBay for around $40 for the project. The boxes were difficult to maintain square and it was increasingly frustrating that the boxes' seemed a bit bowed in places. I used a rubber mallet to pressure the finger joints together. With one blow I actually cracked the top of on. That this point, with a cracker side of the box and the joints not coming together flush I began to regret ordering an unassembled hive. I remedied the situation both glue and small frame nails. Looks like crap, but it isn't visible from the front. The clamps also came in handy with pulling in the bowed sides. By the nights end I had nailed and glued everything. The foundation for the frames was difficult to push into the grooves on the frames, but made a technique for both the deeps and mediums. The entire hive is completely assembled in my dining room awaiting sanding and painting. Overall, it was difficult, but it was an enjoyable experience. If you think you can hammer and glue, then I would suggest giving it a try. It totaled about 4 1/2 hours. It is almost time to start keeping some bees!

Tuesday, July 24, 2012

July 24, 2012

The summer season is winding down and its almost ready to start preparing for fall planting. Unfortunately, I had to redo a lot of things in the garden namely because of Fusarium wilt. There were entirely too many challenges that arose from a wetter than usual Spring season, which lead to very little harvesting. Despite this, I've redone most of the garden beds by raising and adding wood logs underneath. This is an attempt to try Hugelkulture. I am enthusiastic for the fall, in which I will be utilizing a deep mulching method and capitalizing on the solarization and composting that is taking place now. I hope to get to the building of the beehive later this week, as well. It has proved difficult to even get started this late in the year, as most bee packages are available only in the spring. Regardless I am told by members of Beesource.com that I can start anytime in Florida. I hope they are right, and even more hopeful that there are some mentors out there willing to take me under their wing.

Wednesday, July 18, 2012

BeeHive Arrived!

Just a quick note this morning: the bee boxes I ordered last week arrived. Completely unassembled and begging to be put together. That will have to wait until I finish the coop.



Boxes with Fram and TOols Hive Stand and Frame Bee Box Frames

Tuesday, July 17, 2012

Today's Venture

Today I am trying to finish the chicken coop. The first one I built was large, expensive and took months to complete. It was a grand master design, but once finished I felt like it was over done. With no prior construction or building experience, other than putting together puzzles, it proved a difficult task.

That was March of '11, and more than a year later, I am more confident in my skills. I've actually completed the majority, just need to add hardware cloth, hinge the doors, and paint. It is going to be quite a set-up. Originally there was a 5 x 3 ft coop, constructed to look like a house. a 12 ft run went off to the right. An additional 5 ft run was added to the left and a wire enclosure was put on the sides of the bottom so that they had a total of a 22 x 3 ft run. Though soundly built, it was an eye sore for me. Of course it was painted and everything matched. There was a method to the set-up, It was just too monstrous for my little urban lot.

With the new coop, I have scrapped the original coop, harvesting the screws, hinges, and wood paneling. I have done away with the side 5 ft run and another miniature 4 foot run connected to a long 8 ft piece made out of 2x3s. The top half of the 8 ft structure has been divided in half horizontally, since it was 4 ft high. Why I made it 4 ft high, I do not know; maybe so I could go inside. With the remaining structure I have put the cup on top of a 4 ft section.

All in all, it looks 100 % better in my mind. The lesson in building the coop for the first time and sequentially adding more and more run capacity through out the year was invaluable. Although it was an expensive endeavor, it took a lot of guts to rip it all down and start over again.

I feel that the there are at least two distinct lessons that have been learned and represented by the above description.

On a side note: I should be receiving my complete Beehive kit by this evening. This is an exciting endeavor that I will write about later!